NSN 5990-00-484-1516 · NIIN 004841516 · FSC 5990
NO DASHES 5990004841516
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 21.60 AND MAXIMUM 26.00 |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4450 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.240 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 32.00 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 245.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.7 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 470.00 AND MAXIMUM 580.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | MINIMUM 4.00 AND MAXIMUM 7.50 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.9900 |
| AAQL | BODY STYLE | |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AJSL | BODY SIZE | 23 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2380 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.7090 AND INCHES MAXIMUM 0.7290 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 48.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.5800 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | MINIMUM 42.00 AND MAXIMUM 47.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5950 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.2990 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.000 |