NSN 3020-00-270-6166 · NIIN 002706166 · FSC 3020
NO DASHES 3020002706166
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.0000 |
| AJLA | TEETH QUANTITY | 48 |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.7500 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.1667 |
| MATT | MATERIAL | OVERALL IRON CAST |
| STYL | STYLE DESIGNATOR | |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.7812 |
| CWTR | HUB STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | 2 0.250 IN. DIA THREADED HOLES 90.0 DEG APART ON FIRST END HUB,1 HOLE 180.0 DEG FROM KEYWAY,FOR POSITIONING |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.2500 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.3125 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.7500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.7500 |