NSN 5305-00-989-3119 · NIIN 009893119 · FSC 5305
NO DASHES 5305009893119
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Application: MRAP RG-33 AUV
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.313 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.395 AND INCHES MAXIMUM 0.625 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.595 AND INCHES MAXIMUM 0.625 |
| AASK | HEAD STYLE | |
| AGAV | END ITEM IDENTIFICATION | MRAP RG-33 AUV |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD ALL MATERIAL RESPONSES 66 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.190 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.159 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
Supersedes
This item replaces cancelled NIINs 015227304 · 001355064 · 008295139 · 008444415 · 009925997. An older drawing citing one of those numbers resolves here.