NSN 5985-01-356-8597 · NIIN 013568597 · FSC 5985
NO DASHES 5985013568597
In Stock
ATTENUATOR,VARIABLE
Antennas, Waveguides, and Related Equipment
Application: 6625-01-244-3469 CALIBRATOR FREQUENCY
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAFS | APPLICATION DESIGN | TRANSMISSION LINE |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.900 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES NOMINAL 3.000 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES NOMINAL 1.000 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.260 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.460 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.125 |
| AGAV | END ITEM IDENTIFICATION | 6625-01-244-3469 CALIBRATOR FREQUENCY |
| AHTW | VOLTAGE STANDING WAVE RATIO | 1.20 |
| AHUC | COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| AJDB | POWER RATING | MILLIWATTS AVERAGE 100.0 |
| ASYC | INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 1.5 |
| ASYD | OVERALL ATTENUATION RANGE IN DECIBELS | 0.0 TO 63.0 |
| ASYF | ATTENUATION VARIATION METHOD | STEPPED |
| ASYG | STEP POSITION QUANTITY | 6 |
| ASYH | ATTENUATION PER STEP IN DECIBELS | 1.0 AND 2.0 AND 4.0 AND 8.0 AND 16.0 AND 32.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BNGR | FREQUENCY RANGE | HERTZ MINIMUM 0.000 AND MEGAHERTZ MAXIMUM 500.000 |
| BQNR | OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.60 TO 0.60 |
| CQTQ | ADJUSTMENT DEVICE TYPE AND QUANTITY | ELECTRONIC, PROGRAMMABLE 1 |
| CQYJ | MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| CTGG | IMPEDANCE RATING IN OHMS | INPUT-OUTPUT 50.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | CONNECTOR, COAXIAL, FEMALE 2 AND PIN 7 AND TURRET 1 |