NSN 3120-00-360-4501 · NIIN 003604501 · FSC 3120
NO DASHES 3120003604501
In Stock
BEARING HALF,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | INNER LAYER TIN ALLOY |
| ADAR | BODY OUTSIDE DIAMETER | INCHES NOMINAL 2.5000 |
| ADAS | BODY INSIDE DIAMETER | INCHES NOMINAL 2.3260 |
| AGFQ | LEFT FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 3.1250 |
| AGFR | RIGHT FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 3.1250 |
| SFTT | SURFACE TREATMENT | LEFT END SURFACE OF RIGHT FLANGE TIN |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF LEFT FLANGE TIN |
| AAUB | HOLE DIAMETER | FIRST INCHES NOMINAL 0.3120 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.9190 AND INCHES MAXIMUM 1.9210 |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF BODY TIN |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF LEFT FLANGE TIN |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF RIGHT FLANGE TIN |
| MATT | MATERIAL | OUTER LAYER STEEL COMP 1008 OR STEEL COMP 1020 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER ASSN STD ALL MATERIAL RESPONSES AISI |
| CTLF | HOLE SPACING ANGLE | DEGREES NOMINAL 35.0 |
| CTMQ | SURFACE GROOVE LOCATION AND QUANTITY | INTERNAL 2 |
| CTJM | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | HOLE 2 |
| AGKH | LUBRICANT ACCOMMODATION STYLE | |
| BZLX | CORNER SHAPE | ALL CORNERS SQUARE |
| AGFT | RIGHT FLANGE WIDTH | INCHES MINIMUM 0.0860 AND INCHES MAXIMUM 0.0880 |
| AGKD | DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING | FIRST INCHES NOMINAL 0.7810 |
| AGFS | LEFT FLANGE WIDTH | INCHES MINIMUM 0.0860 AND INCHES MAXIMUM 0.0880 |
Supersedes
This item replaces cancelled NIINs 005370460 · 006231356. An older drawing citing one of those numbers resolves here.