NSN 4720-00-612-0785 · NIIN 006120785 · FSC 4720
NO DASHES 4720006120785
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 12 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER BRAIDED FABRIC |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.312 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2000.0 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED EXTERNAL TUBE |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UN |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R2,TYE A-81343 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 4000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AHNC | CONNECTION STYLE | |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING CADMIUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 1A |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.000 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.547 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 12.000 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 38.500 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.312 |