NSN 6105-01-231-5448 · NIIN 012315448 · FSC 6105
NO DASHES 6105012315448
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 6.875 |
| AAJU | OVERALL LENGTH | INCHES 17.312 |
| AAJV | OVERALL WIDTH | INCHES 8.562 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.875 |
| ABGH | STEP DIAMETER | SINGLE END INCHES NOMINAL 1.000 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.875 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-15 DEG |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FACE AND FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 AND UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | SELF-VENTILATED |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BTBY | SHAFT END STYLE | |
| CNMM | FRAME SIZE DESIGNATION | 145JP |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 3.000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.375 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 7.312 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 40.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 5.875 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3450.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 5.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL LOW 208.0 OR LINE TO NEUTRAL HIGH 230.0 OR LINE TO NEUTRAL SECOND MULTIPLE 460.0 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |