NSN 5990-00-886-3685 · NIIN 008863685 · FSC 5990
NO DASHES 5990008863685
In Stock
RESOLVER,ELECTRICAL,LINEAR
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0170 AND INCHES MAXIMUM 0.0320 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 110.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 700.0 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 110.00 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0015 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.4000 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 53.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 55.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 40.00 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 6.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.08 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES NOMINAL 0.125 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.6455 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.5900 AND INCHES MAXIMUM 0.6500 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 235.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0450 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 103.00 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 2.5 AND MAXIMUM 26.0 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.3125 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.5900 AND INCHES MAXIMUM 0.6500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2900 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQTM | TERMINAL LOCATION | REAR |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6900 |
| AAQL | BODY STYLE | |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |