NSN 3120-01-250-8644 · NIIN 012508644 · FSC 3120
NO DASHES 3120012508644
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.2325 AND INCHES MAXIMUM 1.2550 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1895 AND INCHES MAXIMUM 0.1900 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.5570 AND INCHES MAXIMUM 0.5620 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 0.9540 AND INCHES MAXIMUM 0.9740 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.1770 AND INCHES MAXIMUM 0.1970 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.2450 AND INCHES MAXIMUM 0.2500 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.5590 AND INCHES MAXIMUM 0.6490 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.1900 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 36.0 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 630 |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE LINER MFR REF SINGLE MATERIAL RESPONSE AT-HTL 1390 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 012508645. An older drawing citing one of those numbers resolves here.