NSN 5962-01-067-7463 · NIIN 010677463 · FSC 5962
NO DASHES 5962010677463
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Application: DATA ANALYSIS CENTRAL TYPE AN/GYK-T1
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.840 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.310 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.185 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | MILLIWATTS 115.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| AGAV | END ITEM IDENTIFICATION | DATA ANALYSIS CENTRAL TYPE AN/GYK-T1 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND LOW POWER AND SCHOTTKY AND NEGATIVE EDGE TRIGGERED AND SYNCHRONOUS AND W/STORAGE |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 10 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | MULTIPLEXER 4 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | MIL-M-38510 D-2 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 5.5 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 14933-76019 |
| TTQY | TERMINAL TYPE AND QUANTITY | PRINTED CIRCUIT 16 |
Supersedes
This item replaces cancelled NIIN 010728652. An older drawing citing one of those numbers resolves here.