NSN 3130-01-218-7620 · NIIN 012187620 · FSC 3130
NO DASHES 3130012187620
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 1.2500 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 9.1250 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.625 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 17.375 AND INCHES MAXIMUM 18.875 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 5.500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 21.250 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 8.500 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 25.000 |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | INCHES NOMINAL 8.000 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 10.625 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| FEAT | SPECIAL FEATURES | EXPANSION TYPE; GROOVED INNER RACE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | SEAL ALUMINUM ALLOY |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 012124798. An older drawing citing one of those numbers resolves here.