NSN 5905-00-283-6452 · NIIN 002836452 · FSC 5905
NO DASHES 5905002836452
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 6 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 70.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK ALL SECTIONS 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -20.0 TO 20.0 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 1.0 AND KILOHMS 2ND SECTION 10.0 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 300.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.438 |
| AGQL | UNDERCUT LENGTH | INCHES NOMINAL 0.438 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.265 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.125 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.187 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.877 |
| AEDX | SHAFT STYLE | |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 300.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 150.0 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.938 |
Supersedes
This item replaces cancelled NIIN 006420790. An older drawing citing one of those numbers resolves here.