NSN 5305-00-770-2533 · NIIN 007702533 · FSC 5305
NO DASHES 5305007702533
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.102 AND INCHES MAXIMUM 0.183 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 2C |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 800000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.250 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.225 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
Supersedes
This item replaces cancelled NIINs 000597187 · 002067862 · 002398286 · 002735965 · 004041380 · 006877010 · 008352152 · 010366773. An older drawing citing one of those numbers resolves here.