NSN 5910-01-154-6002 · NIIN 011546002 · FSC 5910
NO DASHES 5910011546002
In Stock
CAPACITOR,VARIABLE,AIR DIELECTRI
Capacitors
Application: SUPPORT EQUIPMENT, B-1 AIRCRAFT; CALIBRATION STANDARDS EQUIPMENT; AIRCRAFT, PROWLER EA-6B; WASP CLASS LHD; GENERAL PURPOSE ELECTRONIC TEST EQUIPMENT GPETE; AIRCRAFT, THUNDERBOLT II, A-10; AIRCRAFT, EAGLE F-15; AIRCRAFT, HORNET F/A-18; SUPPORT EQUIPMENT, B-52 AIRCRAFT
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.581 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.106 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.310 |
| AEBC | TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 45.0 |
| AEBD | TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -45.0 TO 45.0 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 0.200 |
| AEBS | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | INCHES NOMINAL 0.300 |
| AECJ | QUALITY FACTOR AT 25 DEG CELSIUS | 2000.0 |
| AGAV | END ITEM IDENTIFICATION | SUPPORT EQUIPMENT, B-1 AIRCRAFT; CALIBRATION STANDARDS EQUIPMENT; AIRCRAFT, PROWLER EA-6B; WASP CLASS LHD; GENERAL PURPOSE ELECTRONIC TEST EQUIPMENT GPETE; AIRCRAFT, THUNDERBOLT II, A-10; AIRCRAFT, EAGLE F-15; AIRCRAFT, HORNET F/A-18; SUPPORT EQUIPMENT, B-52 AIRCRAFT |
| AKNA | INCLOSURE TYPE | UNINCLOSED |
| ATPA | PLATE QUANTITY | 18 |
| AXCM | TUNING CHARACTERISTIC | SINGLE SECTION STRAIGHT LINE CAPACITY |
| AXGR | ADJUSTMENT DEVICE TORQUE | INCH-OUNCES MINIMUM 1.500 AND INCH-OUNCES MAXIMUM 8.000 |
| AXGT | INSULATION DC RESISTANCE AT 25 DEG CELSIUS | MEGOHMS 100000.0 |
| AXHA | PLATE AIR GAP | INCHES 0.008 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | TERMINAL 3 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQTM | TERMINAL LOCATION | PERPENDICULAR CIRCUMFERENCE ON ADJUSTMENT CONTROL END AND CIRCUMFERENCE 180 DEGREES APART ON END OPPOSITE ADJUSTMENT CONTROL |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 1.9 TO 15.7 |
| CTGP | NONDERATED VOLTAGE RATING AND TYPE | SINGLE SECTION DC CONTINUOUS 175.0 |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | SLOTTED SCREW 1 |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER ALL -ETAL SURFACES |
| PRMT | PRECIOUS MATERIAL | SILVER |
| TTQY | TERMINAL TYPE AND QUANTITY | PRINTED CIRCUIT 3 |
Supersedes
This item replaces cancelled NIIN 010390292. An older drawing citing one of those numbers resolves here.