NSN 5910-00-726-7004 · NIIN 007267004 · FSC 5910
NO DASHES 5910007267004
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.500 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.500 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE CERAMIC |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -20.00 TO 20.00 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHM-MICROFARADS 1000.0 |
| CWPN | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 2.5000 |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 0.100 |
| CQFB | VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE | WITHOUT VOLTAGE APPLIED SINGLE SECTION -25.0 TO 15.0 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 150.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 500.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.500 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.200 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 50082-10138 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 0.400 |
Supersedes
This item replaces cancelled NIIN 004781231. An older drawing citing one of those numbers resolves here.