NSN 3020-00-216-7433 · NIIN 002167433 · FSC 3020
NO DASHES 3020002167433
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 10.0760 AND INCHES MAXIMUM 10.0800 |
| AJLA | TEETH QUANTITY | 72 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 10.321 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 26.8333 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.687 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.750 |
| CWRS | BORE NOMINAL DIAMETER | FIRST END INCHES 1.5003 |
| CWSN | KEYWAY NOMINAL WIDTH | FIRST END INCHES 0.3140 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | FIRST END INCHES 0.8990 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.250 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.2115 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.781 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.476 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 2.437 |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIINs 003523270 · 005252810. An older drawing citing one of those numbers resolves here.