NSN 5910-01-011-8220 · NIIN 010118220 · FSC 5910
NO DASHES 5910010118220
In Stock
CAPACITOR,FIXED,METALLIZED,PAPER
Capacitors
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.250 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.307 AND INCHES MAXIMUM 0.327 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0256 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| CQBQ | CAPACITANCE VALUE PER SECTION | NANOFARADS SINGLE SECTION 560.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | AC-RMS SINGLE SECTION 35.0 AND DC SINGLE SECTION 50.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -5.00 TO 5.00 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHM-MICROFARADS 25000.0 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.5000 |
| CWSZ | CASE INSULATION MATERIAL | PLASTIC |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 31435-02-1045 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |