NSN 2520-01-321-2293 · NIIN 013212293 · FSC 2520
NO DASHES 2520013212293
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.468 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 26.312 |
| ABUJ | THREAD SIZE | 3/8-16 |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 45.0 AND MAXIMUM ROCKWELL C 55.0 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 5.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 2.250 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.540 |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 AND UNTHREADED HOLE(S) 8 |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 20.0 |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 0.437 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.437 |