NSN 3020-00-741-2745 · NIIN 007412745 · FSC 3020
NO DASHES 3020007412745
In Stock
GEAR,WORM
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPZ | HELIX ANGLE | DEGREES 4.9500 |
| CWPP | PRESSURE ANGLE | DEGREES 27.5000 |
| CWPC | THREAD FORM QUANTITY | 1 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CWXB | FIRST STEP NOMINAL DIAMETER | BOTH ENDS INCHES 1.767 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 1.250 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 1.365 |
| MATT | MATERIAL | OVERALL STEEL |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 3.240 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 3.188 |
| CWRM | FACE NOMINAL WIDTH | INCHES 6.073 |
| CWTR | HUB STYLE DESIGNATOR | |
| ALPN | FACE TYPE | CONCAVE |
| ANTP | BORE STYLE | |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.938 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.000 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.2160 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 1.250 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.782 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| STYL | STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.875 |
| CWXL | SECOND STEP NOMINAL DIAMETER | BOTH ENDS INCHES 1.772 |
| CWXG | SECOND STEP NOMINAL LENGTH | BOTH ENDS INCHES 1.000 |