NSN 5920-00-928-1511 · NIIN 009281511 · FSC 5920
NO DASHES 5920009281511
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGUU | BUSHING THREAD LENGTH | INCHES NOMINAL 0.360 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.321 AND INCHES MAXIMUM 1.346 |
| ADEE | PANEL THICKNESS | INCHES MAXIMUM 0.125 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 0.540 AND INCHES MAXIMUM 0.580 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 TO 25 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 1 AND SCREW 1 |
| ABKH | BUSHING DIAMETER | INCHES NOMINAL 0.625 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.877 AND INCHES MAXIMUM 0.887 |
| AGVH | FLATTED SIDE BUSHING HOLE LENGTH | INCHES MINIMUM 0.815 AND INCHES MAXIMUM 0.820 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.190 |
| ELEC | VOLTAGE IN VOLTS | 500.0 |
| ABTJ | MOUNTING HOLE QUANTITY | 1 |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| ADZC | ENVIRONMENTAL PROTECTION | HIGHEST AC VOLTAGE RATING AT SEA LEVEL SEALED |
| ADZC | ENVIRONMENTAL PROTECTION | LOCATION NOT OTHERWISE SPECIFIED WATERTIGHT |
| AEVB | MOUNTING HOLE STYLE | |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.670 AND INCHES MAXIMUM 1.710 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.500 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.406 |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND GLASS AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AGUV | CAP DIAMETER | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.900 |
Supersedes
This item replaces cancelled NIINs 010111153 · 010619713. An older drawing citing one of those numbers resolves here.