NSN 4720-00-729-4906 · NIIN 007294906 · FSC 4720
NO DASHES 4720007294906
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 3.281 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 2.375 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 18.625 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1400.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 200.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 600.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.297 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.094 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.297 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 28.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 3.812 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 2.375 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 3.812 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 3.000 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 4.000 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | INTERNAL SUPPORT CONSISTS OF A FLAT STEEL HELICALLY WOUND SPRING |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| CRFY | FLOW ANGLE | FIRST END DEGREES 18.0 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 3.000 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 4.000 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND INTERNAL SUPPORT |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.015 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.015 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 2.750 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.328 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.328 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.781 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 300.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 3.590 |
| ADJS | EXTERIOR COLOR | NATURAL |
| CRFY | FLOW ANGLE | SECOND END DEGREES 50.0 |
Supersedes
This item replaces cancelled NIIN 011360045. An older drawing citing one of those numbers resolves here.