NSN 3020-00-362-4307 · NIIN 003624307 · FSC 3020
NO DASHES 3020003624307
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.748 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.062 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.688 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 0.715 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.185 |
| CWNH | TOOTH FORM | STANDARD |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.626 |
| FEAT | SPECIAL FEATURES | COUNTERBORE LOCATION BOTH ENDS,0.438 IN. DIA BY 0.500 IN. DEEP; 0.750 IN. DIA BY 0.062 IN. DEEP |
| MATT | MATERIAL | OVERALL STEEL COMP 8617 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
| STYL | STYLE DESIGNATOR | |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 55.2 AND ROCKWELL C MAXIMUM 64.7 |
| BDYK | SERRATION PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.3630 |
| CQFM | HARDNESS RATING | BODY ROCKWELL C MINIMUM 55.2 AND ROCKWELL C MAXIMUM 64.7 |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| ADDW | SERRATION QUANTITY | 36 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.0620 |
| AJLA | TEETH QUANTITY | 17 |
| ANTP | BORE STYLE |
Supersedes
This item replaces cancelled NIINs 002040333 · 006507217 · 011991123 · 012322639. An older drawing citing one of those numbers resolves here.