NSN 4720-00-983-8402 · NIIN 009838402 · FSC 4720
NO DASHES 4720009838402
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.656 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.656 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.188 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 2.188 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.188 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 21.500 |
| CTCJ | FLANGE STYLE | |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 4000.0 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 1.844 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.844 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.125 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.188 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.205 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.205 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.020 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.020 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.656 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.656 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.297 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.297 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.359 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 11.000 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 30.0 |
| AECS | BOLT HOLE QUANTITY | 4 |