NSN 3020-00-078-2647 · NIIN 000782647 · FSC 3020
NO DASHES 3020000782647
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 45.0000 |
| CWQD | PITCH ANGLE | DEGREES 45.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 2.406 |
| AJLA | TEETH QUANTITY | 12 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.844 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 1.109 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.6250 |
| CBBL | FEATURES PROVIDED | SPIRAL |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.832 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 3.000 |
| CWNM | TOOTH DIRECTION | LEFT |
| FEAT | SPECIAL FEATURES | COUNTERBORE ON BOTH ENDS W/ 0.6562 IN. NOM AND 0.6875 IN. NOM DIA,0.2812 IN. NOM AND 1.1250 IN. NOM DEPTH |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR | |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 0.875 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 14 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.5833 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 1.563 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.625 |
Supersedes
This item replaces cancelled NIIN 011347181. An older drawing citing one of those numbers resolves here.