NSN 5905-01-103-3233 · NIIN 011033233 · FSC 5905
NO DASHES 5905011033233
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Application: AN/TSC-62A
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.165 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.095 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.075 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 5.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 5.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AGAV | END ITEM IDENTIFICATION | AN/TSC-62A |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.110 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.210 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SOURCE CONTROL 96238-41000450 |
Supersedes
This item replaces cancelled NIIN 011468524. An older drawing citing one of those numbers resolves here.