NSN 5990-00-702-1990 · NIIN 007021990 · FSC 5990
NO DASHES 5990007021990
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 7.7 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJTA | ZRS RESISTANCE IN OHMS | MAXIMUM 44.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MAXIMUM 24.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MAXIMUM 19.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.500 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 748.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.7200 AND INCHES MAXIMUM 0.7400 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AJSL | BODY SIZE | 28 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 3.3850 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6900 AND INCHES MAXIMUM 0.7100 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 31TDX68 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 2.7490 AND INCHES MAXIMUM 2.7500 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 1.0150 AND INCHES MAXIMUM 1.0250 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2450 AND INCHES MAXIMUM 2.2550 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.6550 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 3.0990 AND INCHES MAXIMUM 3.1000 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 0.300 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0010 AND INCHES MAXIMUM 0.0050 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 2.6999 AND INCHES MAXIMUM 2.7000 |