NSN 5307-01-355-7105 · NIIN 013557105 · FSC 5307
NO DASHES 5307013557105
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES NOMINAL 0.325 |
| AASA | THREAD LENGTH | STUD THREAD INCHES NOMINAL 0.325 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.407 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.190 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.190 |
| CSJZ | STUD END SHANK LENGTH | INCHES MINIMUM 0.183 AND INCHES MAXIMUM 0.193 |
| CSXH | STUD END SHANK DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| CSYM | SURFACE FINISH | SHANK MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | STUD THD MICROINCHES 32.0 |
| CTDT | NUT END SHANK DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| FEAT | SPECIAL FEATURES | 0.080 IN. HEX SOCKET,0.090 IN. DEEP ON BOTH ENDS; WITH CETYL ALCOHOL LUBE |
| MATT | MATERIAL | TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |