ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5310-01-330-3398
NSN 5310-01-330-3398  ·  NIIN 013303398  ·  FSC 5310
NO DASHES 5310013303398
In Stock

NUT,SELF-LOCKING,PLATE

Nuts and Washers

Technical characteristics

26 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AAJDTHREAD CLASS3B
AAJFTHREAD DIRECTIONRIGHT-HAND
AAUMLOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
AAWYCOUNTERBORE DIAMETERBASE INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.200
ABAJLUBRICATIONDRY FILM LUBRICANT
ABTBMOUNTING HOLE DIAMETERINCHES MINIMUM 0.093 AND INCHES MAXIMUM 0.103
ACTANUT STYLE
ACVNNUT LENGTHINCHES NOMINAL 1.375
ADEANUT HEIGHTINCHES NOMINAL 0.730
ADEBPLATE THICKNESSINCHES MINIMUM 0.023 AND INCHES MAXIMUM 0.027
ADECPLATE WIDTHINCHES MAXIMUM 0.865
ADFKNUT COUNTERBORE DEPTHBASE INCHES MINIMUM 0.843 AND INCHES MAXIMUM 0.853
ADFPNUT MOUNTING PROVISIONSTRAIGHT HOLES
ADFUMOUNTING HOLE ARRANGEMENT STYLE
ADFWDISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTERINCHES MINIMUM 0.557 AND INCHES MAXIMUM 0.567
ADFYCENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTHINCHES MINIMUM 1.123 AND INCHES MAXIMUM 1.127
BZRRTHREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
CBBLFEATURES PROVIDEDFLOATING NUT
CMLPTHREAD QUANTITY PER INCH32
CQJXNOMINAL THREAD SIZEINCHES 0.190
FEATSPECIAL FEATURESTHREE SHIMS,CRES,0.010 IN. THK,W/PEEL TABS,BONDED TO BASE; NUT SHANK PROTRUDES 0.260 IN. MIN,0.280 IN. MAX FM BASE
MATTMATERIALNUT IRON ALLOY 660
MATTMATERIALSPRING STEEL COMP 631
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONNUT ASSN STD SINGLE MATERIAL RESPONSE A-S 5731 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 5732 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 5525
SFTTSURFACE TREATMENTOVERALL PASSIVATE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONOVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35