NSN 6105-00-136-7293 · NIIN 001367293 · FSC 6105
NO DASHES 6105001367293
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 3.738 |
| AAJU | OVERALL LENGTH | INCHES 4.025 |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | THERMAL PROTECTIVE DEVICE AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT WATTS 16.0 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.250 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.460 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.988 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 0.625 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 40.0 AND OPERATING CELSIUS 55.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1550.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.125 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.550 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 230.0 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AAJV | OVERALL WIDTH | INCHES 3.500 |
| AASA | THREAD LENGTH | SINGLE END INCHES MINIMUM 0.410 AND INCHES MAXIMUM 0.510 |
Supersedes
This item replaces cancelled NIIN 004014636. An older drawing citing one of those numbers resolves here.