NSN 3020-01-068-3563 · NIIN 010683563 · FSC 3020
NO DASHES 3020010683563
In Stock
GEAR,INTERNAL
Gears, Pulleys, Sprockets, and Transmission Chain
Application: ENGINE,GENERAL MOTORS CORP.,SERIES 71
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGAV | END ITEM IDENTIFICATION | ENGINE,GENERAL MOTORS CORP.,SERIES 71 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.6250 |
| AJLA | TEETH QUANTITY | 21 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SPUR TEETH |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.420 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.236 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.700 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.874 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.249 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.552 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| MATT | MATERIAL | OVERALL STEEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIINs 007287435 · 011663057. An older drawing citing one of those numbers resolves here.