NSN 3130-00-470-7443 · NIIN 004707443 · FSC 3130
NO DASHES 3130004707443
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 3.8750 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| FEAT | SPECIAL FEATURES | FURNISHED WITH A UNTHREADED 1.0000 IN DIA,1.2812 DEEP ROD HOLE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | BEARING SURFACE STEEL |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | SEAL STEEL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 30.0 |
| ABGF | GROOVE WIDTH | INCHES NOMINAL 0.3125 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 2.4375 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 6.7500 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.7500 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 5.7500 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 2.3593 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| STYL | STYLE DESIGNATOR | |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |