SCREW,MACHINE
Screws
Application: ATF; AJN; AXF; MVA; AUN; AHN; LBA; ACF; AUF; AYF
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.256 AND INCHES MAXIMUM 0.270 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.250 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.087 AND INCHES MAXIMUM 0.097 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | ATF; AJN; AXF; MVA; AUN; AHN; LBA; ACF; AUF; AYF |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.250 |
Supersedes
This item replaces cancelled NIINs 000154961 · 000107696 · 000159238 · 000159237 · 000141542 · 000602715 · 000453292 · 000436827 · 000597884 · 002069982 · 002061662 · 002060515 · 002163339 · 002061819 · 002825925 · 004291651 · 004679476 · 005157294 · 005500509 · 005800576 · 005828494 · 005903146 · 005761119 · 006196166 · 006165390 · 006385390 · 006396495 · 006882325 · 006851473 · 008189352 · 008123543 · 008202543 · 008013184 · 008242695 · 008444800 · 008940234 · 008779521 · 009323902 · 009144630 · 009787022 · 010676843. An older drawing citing one of those numbers resolves here.