NSN 5305-00-958-5453 · NIIN 009585453 · FSC 5305
NO DASHES 5305009585453
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MOD BY MATL AND TENSILE STRENGTH |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 2C |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.279 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.375 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 2A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.292 |
Supersedes
This item replaces cancelled NIINs 000133423 · 000594551 · 002978054 · 002614446 · 005273904 · 006851467 · 007213374 · 007317348 · 008262445 · 010720131. An older drawing citing one of those numbers resolves here.