NSN 3445-01-528-5910 · NIIN 015285910 · FSC 3445
NO DASHES 3445015285910
In Stock
SHEAR BLADE
Punching and Shearing Machines
Application: PUNCH PRESS
Technical characteristics
8 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 24.880 |
| AGAV | END ITEM IDENTIFICATION | PUNCH PRESS |
| MATT | MATERIAL | STEEL |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.988 AND INCHES MAXIMUM 2.002 |
| FEAT | SPECIAL FEATURES | HEAT TREATED 57-58 R.C.; HAS 6 HOLES DRILLED 10.25 MM, TAPPED M12-1.75, CENTERED 1.000 FROM BOTTOM/LONG EDGE AND 2.44, 6.44, 10.44, 14.44, 18.44, AND 22.44 IN. FROM LEFT EDGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE SCOTCH-AN: S-7 (BEARCAT) |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHEAR BLADE 24 IN. |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.498 AND INCHES MAXIMUM 0.500 |