NSN 5905-00-451-5768 · NIIN 004515768 · FSC 5905
NO DASHES 5905004515768
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.688 AND INCHES MAXIMUM 0.812 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.500 |
| AKNA | INCLOSURE TYPE | ENCASED |
| PKWT | UNPACKAGED UNIT WEIGHT | GRAMS 8.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.374 |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 6.000 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AAPP | ELECTRICAL RESISTANCE | OHMS 100.000 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39009 TO 1 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.133 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AFWW | TERMINAL WIDTH | INCHES MINIMUM 0.140 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.437 |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| STYL | STYLE DESIGNATOR | |
| BYML | MOUNTING HOLE SIZE | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.099 |
Supersedes
This item replaces cancelled NIINs 000107053 · 001720857 · 008372560 · 010161023. An older drawing citing one of those numbers resolves here.