NSN 6105-00-833-7602 · NIIN 008337602 · FSC 6105
NO DASHES 6105008337602
In Stock
MOTOR-TACHOMETER GENERATOR
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 0.335 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| FAAZ | PHASE | INPUT TWO |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 8 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.335 |
| CWDY | TEMP RATING | OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 110.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 |
| AYHE | EXCITOR TYPE | SEPARATELY EXCITED |
| BFLQ | CALIBRATION SPEED IN RPM | 1000.0 |
| AAJT | OVERALL HEIGHT | INCHES 0.750 |
| AAJU | OVERALL LENGTH | INCHES 2.415 |
| AAJV | OVERALL WIDTH | INCHES 0.750 |
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.054 |
| ABSA | SPLINE QUANTITY | 13 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.125 |
| ACDC | CURRENT TYPE | INPUT AC |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 5400.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 18.0 |
| CNXS | POWER RATING | INPUT WATTS 5.800 |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 18.0 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 0.3 |
| BKPC | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | AC 0.22 |
| BFMF | COOLING METHOD | NONVENTILATED |
Supersedes
This item replaces cancelled NIIN 006608855. An older drawing citing one of those numbers resolves here.