NSN 3130-01-197-1620 · NIIN 011971620 · FSC 3130
NO DASHES 3130011971620
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.6250 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 2.4375 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.0000 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 7.0625 AND INCHES MAXIMUM 7.9375 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 5.5000 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.7500 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 9.5000 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 2.5000 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 2.5625 |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | CLOSED OR OPEN |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 2.6875 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
Supersedes
This item replaces cancelled NIIN 012674126. An older drawing citing one of those numbers resolves here.