NSN 4720-00-670-4330 · NIIN 006704330 · FSC 4720
NO DASHES 4720006704330
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 00624, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.546 |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.109 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 300.0 |
| ABKG | BOLT CIRCLE DIAMETER | FIRST END INCHES NOMINAL 2.562 |
| ABKG | BOLT CIRCLE DIAMETER | SECOND END INCHES NOMINAL 1.855 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.052 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.063 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.156 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.500 |
| ADJS | EXTERIOR COLOR | NATURAL |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.375 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 1.750 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.375 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 1.750 |
| AHNC | CONNECTION STYLE | |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 1.182 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.875 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT AND FIRE RETARDANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.266 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.203 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.052 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.052 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 40.0 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.312 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.546 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.109 |
| AECS | BOLT HOLE QUANTITY | 4 |
| CTCJ | FLANGE STYLE | |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 750.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 1500.0 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 25.000 |
Supersedes
This item replaces cancelled NIIN 008110691. An older drawing citing one of those numbers resolves here.