NSN 6105-01-196-6373 · NIIN 011966373 · FSC 6105
NO DASHES 6105011966373
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | SINGLE END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 6.625 |
| AAJU | OVERALL LENGTH | INCHES 14.880 |
| AAJV | OVERALL WIDTH | INCHES 6.500 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.580 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.120 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.060 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.625 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.180 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-15 DEG |
| ANTN | SPECIFIC USE | SERIES CS TURBINE PUMPS,CENTRIFUGAL,FSCM 16584 |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BFMR | KEYWAY CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.850 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-POUNDS RUNNING 18.0 |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 56 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.625 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.858 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 3.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 40.0 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW NO LOAD 2875.0 AND HIGH NO LOAD 3450.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.875 |
| CWGL | CURRENT RATING IN AMPS | INPUT FIRST MULTIPLE 3.400 OR SECOND MULTIPLE 1.700 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE LOW 208.0 OR LINE TO LINE HIGH 230.0 OR LINE TO LINE FIRST MULTIPLE 460.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A11 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |