NSN 5306-00-283-0192 · NIIN 002830192 · FSC 5306
NO DASHES 5306002830192
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.5000 AND INCHES MAXIMUM 0.5005 |
| MATT | MATERIAL | OVERALL STEEL COMP 3135 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.125 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.750 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.750 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.875 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 100000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 2.125 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.375 |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES NOMINAL 0.281 |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.625 |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 240.0 AND BRINELL STANDARD MAXIMUM 280.0 |
| FEAT | SPECIAL FEATURES | 1/32 IN. RADIUS ON SHANK UNDER HEAD |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
Supersedes
This item replaces cancelled NIIN 003672628. An older drawing citing one of those numbers resolves here.