NSN 5915-00-014-6642 · NIIN 000146642 · FSC 5915
NO DASHES 5915000146642
In Stock
FILTER,LOW PASS
Filters and Networks
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.215 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.875 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MAXIMUM 0.416 |
| AECR | VIBRATION RESISTANCE RANGE IN HERTZ | 10.0 TO 2000.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFSV | AVERAGE LIFE RATING IN HOURS | 1000.0 |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED HERTZ BLANK 480.0 |
| AHBL | PRINCIPAL CIRCUITRY TYPE PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED INDUCTANCE-RESISTANCE BLANK |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | LOCATION NOT OTHERWISE SPECIFIED THREADED BUSHING 1 |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | LOCATION NOT OTHERWISE SPECIFIED BLANK 16.5 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | LOCATION NOT OTHERWISE SPECIFIED TAB, SOLDER LUG INPUT-OUTPUT 2 |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED KILOHERTZ BLANK 30.00 AND KILOHERTZ BLANK 150.00 AND KILOHERTZ BLANK 300.00 AND MEGAHERTZ BLANK 1.00 AND MEGAHERTZ BLANK 100.00 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED KILOHERTZ BLANK 30.00 AND MEGAHERTZ BLANK 100.00 |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | LOCATION NOT OTHERWISE SPECIFIED NOMINAL BLANK 5.0 AND NOMINAL BLANK 28.0 AND NOMINAL BLANK 39.0 AND NOMINAL BLANK 65.0 AND NOMINAL BLANK 45.0 |
| CRDC | MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE | VOLTS AT SEA LEVEL 400.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 98230-0N088830 |