NSN 3120-00-904-9829 · NIIN 009049829 · FSC 3120
NO DASHES 3120009049829
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C NOMINAL 60.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C NOMINAL 23.0 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.6150 AND INCHES MAXIMUM 0.6350 |
| MATT | MATERIAL | INNER MEMBER STEEL |
| MATT | MATERIAL | RACE INSERT STEEL |
| MATT | MATERIAL | RACE LINER PLASTIC TETRAFLUOROETHYLENE |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 865 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.190 |
| MATT | MATERIAL | ROD END BODY STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 7440 |
| FEAT | SPECIAL FEATURES | 6 1/2 DEG SELF-ALIGNMENT IN EITHER DIRECTION,MAGNETIC PARTICLE INSPECTED (MAGNAFLUXED) ROD END SHANK STAMPED W/LETTER (M) |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER MEMBER FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE LINER MFR REF SINGLE MATERIAL RESPONSE 1-300-341,91547 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633 |
| SFTT | SURFACE TREATMENT | INNER MEMBER CHROMIUM |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.7500 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1895 AND INCHES MAXIMUM 0.1915 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 1.2400 AND INCHES MAXIMUM 1.2600 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.2450 AND INCHES MAXIMUM 0.2550 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.3070 AND INCHES MAXIMUM 0.3120 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.5530 AND INCHES MAXIMUM 1.5730 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| AAZF | SHANK STYLE |