NSN 3040-00-143-5345 · NIIN 001435345 · FSC 3040
NO DASHES 3040001435345
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMCZ | FIRST END KEYWAY WIDTH | INCHES MINIMUM 0.0580 AND INCHES MAXIMUM 0.0595 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.1610 AND INCHES MAXIMUM 0.1690 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.4335 AND INCHES MAXIMUM 0.4345 |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 0.151 AND INCHES MAXIMUM 0.161 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.4075 AND INCHES MAXIMUM 0.4095 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.4335 AND INCHES MAXIMUM 0.4345 |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 40.0 |
| AMGF | SECOND END PITCH DIAMETER | INCHES MINIMUM 0.4190 AND INCHES MAXIMUM 0.4210 |
| AMDG | FIRST END KEYWAY DEPTH | INCHES NOMINAL 0.071 |
| ABKZ | EXTERNAL KEYWAY LENGTH | FIRST END INCHES NOMINAL 0.313 |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.183 AND INCHES MAXIMUM 2.193 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S6330 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6320 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6322 OR MFR REF SINGLE MATERIAL RESPONSE 9-2901 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MATT | MATERIAL | STEEL |
| AAGZ | FIRST END STYLE | |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.590 AND INCHES MAXIMUM 0.592 |
| BDSR | SECOND END SPLINE QUANTITY | 36 |
| ATPC | STEP QUANTITY | 4 |