NSN 4720-01-133-5954 · NIIN 011335954 · FSC 4720
NO DASHES 4720011335954
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.130 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.360 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 11.000 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 119.0 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 4000.0 |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER BRAIDED STEEL WIRE |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.625 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.625 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 82.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 81.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 11.270 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES (RNVC) HAVE INDICATED THIER PART NUMBERS CONTAINED ASBESTOS. THEY COINTINUE TO MANUFACTGUE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL. |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT (UNJ) |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT (UNJ) |