NSN 5905-00-936-8402 · NIIN 009368402 · FSC 5905
NO DASHES 5905009368402
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.00 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.344 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3600.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.000 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.500 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.547 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.000 |
| AAPN | SECTION QUANTITY | 1 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AEDX | SHAFT STYLE | |
| AAQL | BODY STYLE |
Supersedes
This item replaces cancelled NIIN 009952219. An older drawing citing one of those numbers resolves here.