NSN 3020-00-734-6740 · NIIN 007346740 · FSC 3020
NO DASHES 3020007346740
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 17.5000 |
| STYL | STYLE DESIGNATOR | |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.063 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 20 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 10.1667 |
| AJLA | TEETH QUANTITY | 61 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 3.3333 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 10.450 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.500 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66JGAAISI TO SAE 8620 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 3.327 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 4.688 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 4.188 |
| SFTT | SURFACE TREATMENT | OVERALL CARBON |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 3.997 |
| MATT | MATERIAL | OVERALL STEEL |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.750 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.185 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.442 |
| CWNH | TOOTH FORM | STUB |