NSN 5990-00-503-2459 · NIIN 005032459 · FSC 5990
NO DASHES 5990005032459
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 45.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 0.60 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 0.26 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 50.000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 45.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 15.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 5.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 22 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | AMPERES MAXIMUM 1.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0600 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6430 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 255.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0470 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0320 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.450 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2000 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1845 AND INCHES MAXIMUM 0.1850 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5600 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 2.0000 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.1000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.1250 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.1600 AND INCHES MAXIMUM 2.1610 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.2030 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9990 AND INCHES MAXIMUM 1.9995 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
Supersedes
This item replaces cancelled NIIN 006865576. An older drawing citing one of those numbers resolves here.