NSN 3110-00-151-8095 · NIIN 001518095 · FSC 3110
NO DASHES 3110001518095
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2500 AND INCHES MAXIMUM 0.2503 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.6870 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.0420 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.2260 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2510 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0002 AND INCHES MAXIMUM RADIAL 0.0006 |
| CTLH | OUTER RING TAPER | PER FOOT IN INCHES NOMINAL 0.0680 |
| FEAT | SPECIAL FEATURES | BORE CORNER CHAMFERED0.0100 IN. BY 45 DEG AND SHIELDS ARE REMOVABLE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIINs 004793892 · 005545308 · 008915290 · 009371838. An older drawing citing one of those numbers resolves here.