NSN 5315-00-600-8919 · NIIN 006008919 · FSC 5315
NO DASHES 5315006008919
In Stock
PIN,ECCENTRIC
Nails, Machine Keys, and Pins
Application: MACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPW | THIRD STEP LENGTH | INCHES NOMINAL 0.517 |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.280 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL A MINIMUM 67.0 AND ROCKWELL A MAXIMUM 70.0 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 0.610 |
| AASR | HEAD INSIDE DIAMETER | INCHES NOMINAL 0.312 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.492 |
| AASK | HEAD STYLE | |
| ABPV | THIRD STEP DIAMETER | INCHES NOMINAL 0.250 |
| ABPS | FIRST STEP LENGTH | INCHES NOMINAL 1.752 |
| ABPU | SECOND STEP LENGTH | INCHES NOMINAL 3.223 |
| ABPR | FIRST STEP DIAMETER | INCHES NOMINAL 0.715 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL STD SINGLE TREATMENT RESPONSE -IL-STD-171,TYE - |
| ABQX | HEAD WIDTH | INCHES NOMINAL 0.499 |
| ACHW | NUMERIC DESIGNATION OF STEP ECCENTRIC TO HEAD | 1 AND 2 |
| AGAV | END ITEM IDENTIFICATION | MACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE MANGANESE |
| ABNW | OFFSET DISTANCE BETWEEN GEOMETRIC CENTER OF HEAD AND CENTERLINE OF SHANK/SHOULDER | INCHES NOMINAL 0.305 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 003446475. An older drawing citing one of those numbers resolves here.