NSN 5905-00-968-7740 · NIIN 009687740 · FSC 5905
NO DASHES 5905009687740
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 145.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 6 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.90 |
| AEFY | SHAFT END PLAY | INCHES 0.003 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.1495 AND INCHES MAXIMUM 0.7500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 3.000 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 3.1510 |
| AEDX | SHAFT STYLE | |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 5.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.573 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 3.005 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.000 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.812 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.761 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS 360 DEG SINE-COSINE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS 1ST SECTION 500.0 AND KILOHMS 2ND SECTION 2.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |